Type Alias MessageQueue

pub type MessageQueue = Pallet<Runtime>;

Aliased Type

struct MessageQueue(/* private fields */);

Implementations

impl<T> Pallet<T>

where T: Config,

pub fn do_execute_overweight( origin: <<T as Config>::MessageProcessor as ProcessMessage>::Origin, page_index: u32, index: <T as Config>::Size, weight_limit: Weight, ) -> Result<Weight, Error<T>>

Try to execute a single message that was marked as overweight.

The weight_limit is the weight that can be consumed to execute the message. The base weight of the function it self must be measured by the caller.

pub fn do_try_state() -> Result<(), DispatchError>

Ensure the correctness of state of this pallet.

Assumptions-

If serviceHead points to a ready Queue, then BookState of that Queue has:

• message_count > 0
• size > 0
• end > begin
• Some(ready_neighbours)
• If ready_neighbours.next == self.origin, then ready_neighbours.prev == self.origin (only queue in ring)

For Pages(begin to end-1) in BookState:

• remaining > 0
• remaining_size > 0
• first <= last
• Every page can be decoded into peek_* functions

pub fn debug_info() -> String

Print the pages in each queue and the messages in each page.

Processed messages are prefixed with a * and the current beginning page with a >.

Example output

queue Here:
  page 0: []
> page 1: []
  page 2: ["\0weight=4", "\0c", ]
  page 3: ["\0bigbig 1", ]
  page 4: ["\0bigbig 2", ]
  page 5: ["\0bigbig 3", ]

impl<T> Pallet<T>

where T: Config,

pub fn reap_page( origin: <T as Config>::RuntimeOrigin, message_origin: <<T as Config>::MessageProcessor as ProcessMessage>::Origin, page_index: u32, ) -> Result<(), DispatchError>

Remove a page which has no more messages remaining to be processed or is stale.

pub fn execute_overweight( origin: <T as Config>::RuntimeOrigin, message_origin: <<T as Config>::MessageProcessor as ProcessMessage>::Origin, page: u32, index: <T as Config>::Size, weight_limit: Weight, ) -> Result<PostDispatchInfo, DispatchErrorWithPostInfo<PostDispatchInfo>>

Execute an overweight message.

Temporary processing errors will be propagated whereas permanent errors are treated as success condition.

• origin: Must be Signed.
• message_origin: The origin from which the message to be executed arrived.
• page: The page in the queue in which the message to be executed is sitting.
• index: The index into the queue of the message to be executed.
• weight_limit: The maximum amount of weight allowed to be consumed in the execution of the message.

Benchmark complexity considerations: O(index + weight_limit).

Trait Implementations

impl<T> BeforeAllRuntimeMigrations for Pallet<T>

where T: Config,

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

impl<T> Callable<T> for Pallet<T>

where T: Config,

type RuntimeCall = Call<T>

impl<T> Clone for Pallet<T>

fn clone(&self) -> Pallet<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> DispatchViewFunction for Pallet<T>

where T: Config,

fn dispatch_view_function<O>( id: &ViewFunctionId, input: &mut &[u8], output: &mut O, ) -> Result<(), ViewFunctionDispatchError>

where O: Output,

impl<T> EnqueueMessage<<<T as Config>::MessageProcessor as ProcessMessage>::Origin> for Pallet<T>

where T: Config,

type MaxMessageLen = MaxMessageLen<<<T as Config>::MessageProcessor as ProcessMessage>::Origin, <T as Config>::Size, <T as Config>::HeapSize>

The maximal length any enqueued message may have.

fn enqueue_message( message: BoundedSlice<'_, u8, <Pallet<T> as EnqueueMessage<<<T as Config>::MessageProcessor as ProcessMessage>::Origin>>::MaxMessageLen>, origin: <<T as Config>::MessageProcessor as ProcessMessage>::Origin, )

Enqueue a single message from a specific origin.

fn enqueue_messages<'a>( messages: impl Iterator<Item = BoundedSlice<'a, u8, <Pallet<T> as EnqueueMessage<<<T as Config>::MessageProcessor as ProcessMessage>::Origin>>::MaxMessageLen>>, origin: <<T as Config>::MessageProcessor as ProcessMessage>::Origin, )

Enqueue multiple messages from a specific origin.

fn sweep_queue( origin: <<T as Config>::MessageProcessor as ProcessMessage>::Origin, )

Any remaining unprocessed messages should happen only lazily, not proactively.

fn footprint( origin: <<T as Config>::MessageProcessor as ProcessMessage>::Origin, ) -> QueueFootprint

Return the state footprint of the given queue.

impl<T> ForceSetHead<<<T as Config>::MessageProcessor as ProcessMessage>::Origin> for Pallet<T>

where T: Config,

fn force_set_head( weight: &mut WeightMeter, origin: &<<T as Config>::MessageProcessor as ProcessMessage>::Origin, ) -> Result<bool, ()>

Set the ServiceHead to origin.

impl<T> GetStorageVersion for Pallet<T>

where T: Config,

type InCodeStorageVersion = NoStorageVersionSet

This type is generated by the pallet macro.

fn in_code_storage_version() -> <Pallet<T> as GetStorageVersion>::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or [NoStorageVersionSet] if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use [Self::current_storage_version] instead.

impl<T> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_initialize( _n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, ) -> Weight

Block initialization hook. This is called at the very beginning of block execution.

fn on_idle( _n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, remaining_weight: Weight, ) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before [Hooks::on_finalize]).

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution.

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application.

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution.

fn integrity_test()

Check the integrity of this pallet’s configuration.

impl<T> IntegrityTest for Pallet<T>

where T: Config,

fn integrity_test()

See [Hooks::integrity_test].

impl<T> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn offchain_worker( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

This function is being called after every block import (when fully synced).

impl<T> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_finalize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

See [Hooks::on_finalize].

impl<T> OnGenesis for Pallet<T>

where T: Config,

fn on_genesis()

Something that should happen at genesis.

impl<T> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_idle( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, remaining_weight: Weight, ) -> Weight

See [Hooks::on_idle].

impl<T> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_initialize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, ) -> Weight

See [Hooks::on_initialize].

impl<T> OnPoll<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_poll( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, weight: &mut WeightMeter, )

Code to execute every now and then at the beginning of the block after inherent application.

impl<T> OnRuntimeUpgrade for Pallet<T>

where T: Config,

fn on_runtime_upgrade() -> Weight

See [Hooks::on_runtime_upgrade].

impl<T> PalletInfoAccess for Pallet<T>

where T: Config,

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T> PalletsInfoAccess for Pallet<T>

where T: Config,

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq for Pallet<T>

fn eq(&self, other: &Pallet<T>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> ServiceQueues for Pallet<T>

where T: Config,

fn execute_overweight( weight_limit: Weight, _: <Pallet<T> as ServiceQueues>::OverweightMessageAddress, ) -> Result<Weight, ExecuteOverweightError>

Execute a single overweight message.

The weight limit must be enough for execute_overweight and the message execution itself.

type OverweightMessageAddress = (<<T as Config>::MessageProcessor as ProcessMessage>::Origin, u32, <T as Config>::Size)

Addresses a specific overweight message.

fn service_queues(weight_limit: Weight) -> Weight

Service all message queues in some fair manner.

impl<T> StorageInfoTrait for Pallet<T>

where T: Config,

fn storage_info() -> Vec<StorageInfo>

impl<T> ViewFunctionIdPrefix for Pallet<T>

where T: Config,

fn prefix() -> [u8; 16]

impl<T> WhitelistedStorageKeys for Pallet<T>

where T: Config,

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>